- #Traxxas rustler motor upgrade how to
- #Traxxas rustler motor upgrade install
- #Traxxas rustler motor upgrade upgrade
- #Traxxas rustler motor upgrade full
- #Traxxas rustler motor upgrade free
With the colors offered you can choose a color scheme to match your vehicle or your style. Upgrading to RPM not only adds some durability to your rig, but it allows you to have a customized look as well. Now that you got your A-arms replaced, the Rustler is ready for some bashing. That is all there is to the Traxxas Rustler Suspension Upgrade.
#Traxxas rustler motor upgrade install
Next, Set the bumper back in place and install the 3 screws. Reattach the lower shock to the arm and then the arm to the axle hub.Īfter both arms have been replaced, Put the holding plate back on over the pins and fasten with the screw. Set the new arm in place on the chassis and slide the pin back in. Perform the same steps for the other side. Again, you may need to use the pliers to pull the suspension pin out. Now, remove the screw on the center pin holder plate and pull the plate out.
Take the screw holding the lower shock to the arm out and the screw holding the arm to the axle hub.
Then, remove the 3 screws holding the rear bumper and set the bumper aside. The rear A-arms are very much like the front. Note: If you are replacing both A-arms then do not reinstall the front bumper and center suspension pin holder until you have installed both A-arms. Now reinstall the front bumper with the 5 screws originally removed. Position the suspension pin holder back in place and faster with the center screw. Reattach the shock to the arm and then fasten the steering knuckle to the arm. Slide the new suspension arm in to place on the chassis and re-install the pin removed earlier. Traxxas 3636P Aluminum Steering Block Set Pink For Slash Rustler Stampede Bandit USD 29.95 USD 35.00 Add to Cart Traxxas 3632P Aluminum 30Degree Caster Block 2 pcs Pink For Slash Rustler Stampede USD 19.95 USD 24.00 Add to Cart Traxxas 3631L Front HD Suspension Arms 2 pcs White For Slash Rustler Stampede Bigfoot USD 10. Installing the front arms is the same as removing just in reverse order. The procedure is the same for both sides.
#Traxxas rustler motor upgrade free
The A-arm is now free to pull off the truck. Once the metal holder is out you can now pull the pin holding the A-arm out, you may need to use a pair of needle nose pliers. Then, remove the screw in the center of the suspension pin holder and pull outward to remove. Now, you need to remove the screw/pin holding the A-arm to the steering knuckle, and the lower shock screw holding the shock to the A-arm. There are 2 through the front and 3 on the bottom side, set that aside with the screws. Next, take the 5 screws out of the front bumper. The first thing to do is, remove the front wheels and set them aside. I am going to start with the front arms because that’s where it broke, so I’m going to change them first. I am using the blue RPM arms for my Rustler.īuy them here! Remove Front Suspension Arms RPM parts are offered in a variety of colors that you can choose from. This will add to the durability of the Rustler.
#Traxxas rustler motor upgrade upgrade
This Upgrade replaces all front and rear suspension arms with new RPM arms. RPM was used for my Traxxas Rustler Upgrade Parts. Broke the A-arm, toe link and the steering linkage. That was it for the day! The Rustler 4×4 was broken. I cut the corner too tight and smacked into a tree with the right front tire with a loud thud. Running my Rustler in about 2″ of snow we had, hitting my jumps and racing around the backyard.
#Traxxas rustler motor upgrade how to
This part should complete the basics of the best upgrades and the ones that you should get first.After my Rustler 4×4 broke, I decided to write an article on how to perform a Traxxas Rustler Suspension Upgrade. No leaping between tall buildings, only Superman is rated for that.). Once you have this in place, aside from bumpers and a few other small mods, your unit should be pretty stone-cold solid and ready to face whatever pitfalls your imagination can conjure for it(within reason, of course. Available in different colors, the green one we are showing here is just an example. An aluminum bulkhead adds weight and strength so that you can survive more crashes and keep your maintenance down to a minimal level. Aluminum bulkhead – This is going to be the last part integral to your transformation from truck to tank-truck.This is a great upgrade and many other owners swear by them, so don’t hesitate, get your own(you’ll need to get a set of two for the Rustler to complete this upgrade). Don’t believe us? Take a look at some of the reviews.
Flexible, these will help to absorb impacts that could snap a lesser set of A Arms.
#Traxxas rustler motor upgrade full
That said, A Arms will not only make your truck more durable, but they will take a full ounce off of the weight of the vehicle.
0 kommentar(er)
